How the Houston concrete slab calculator works
The calculator does three things. It works out the volume: length times width gives square feet, times the thickness in feet gives cubic feet, divided by 27 gives cubic yards. It adds the waste allowance you choose. Then it prices the slab two ways, with the Houston installed rate for your type of job and with a general Houston rate, and prices the concrete alone at the delivered ready-mix rate.
Type the size and pick the job. The numbers change as you type.
- Slab area
- 576 sq ft
- Concrete to order
- 7.82 cu yd
- 7.11 cu yd in the slab, plus 10%
- Installed, patio slab rate
- $3,456 to $6,336
- Installed, Houston wage-model rate
- $3,237 to $6,474
- Delivered ready-mix only (no labor, base, steel or forms)
- $978 to $1,252
The job-type rate comes from constructlytools' Houston guide (reviewed May 2026); the wage-model rate is projectcosted's Houston figure of $5.62 to $11.24 per sq ft (August 2026); ready-mix is the same Houston guide's $125 to $160 per delivered cubic yard. Both are published estimates for planning, not a quote.
Cubic yards by slab size and thickness
The same math, worked out for the slab sizes Houston homeowners ask about most, before any waste allowance:
| Size (ft) | 4 in | 5 in | 6 in |
|---|---|---|---|
| 10x10 | 1.23 | 1.54 | 1.85 |
| 12x16 | 2.37 | 2.96 | 3.56 |
| 20x20 | 4.94 | 6.17 | 7.41 |
| 24x24 | 7.11 | 8.89 | 10.67 |
| 30x40 | 14.81 | 18.52 | 22.22 |
| 40x60 | 29.63 | 37.04 | 44.44 |
Swipe the table sideways to see every column →
Flat slab only. Thickened edges, grade beams and footings add concrete the table doesn't count.

Where the Houston rates come from
Installed price by job
constructlytools' Houston guide (last reviewed May 16, 2026) lists installed prices per square foot by job: shed and storage pads $8 to $11, patios $6 to $11, garage floors $6 to $11, driveways $6 to $14 and house foundations $10 to $18. Pick the job in the calculator and it uses that range.
General Houston rate
projectcosted (updated August 23, 2026) models a Houston slab at $5.62 to $11.24 per square foot from Bureau of Labor Statistics wage data. It is the second line in the results so you can see how far the two sources agree.
Ready-mix
The concrete-only line uses $125 to $160 per cubic yard delivered in the Houston metro from the same constructlytools guide. It leaves out labor, forms, base, steel, pumping and finishing, which is why it is a fraction of the installed figure. The cost to pour a concrete slab in Houston page shows how a typical bill splits between labor and materials.
What the calculator can't see
A calculator knows the size. It doesn't know the lot, and in Houston the lot moves the price:
- Beaumont clay that needs a thicker section or more steel; constructlytools prices those upgrades at $1.00 to $2.50 and $0.75 to $1.50 per sq ft.
- Wet ground: soft clay cut out and replaced, or water pumped off before forming.
- Height: a new building slab inside the City sits 12 inches above the nearest sewer manhole rim, and higher in a floodplain, which can mean fill.
- Access: a backyard reached through a narrow gate may need a pump or buggies.
- Rain days, which Houston has about 64 of a year; see pouring concrete in Houston humidity and rain.
Not sure which thickness to enter? The slab thickness, rebar and vapor barrier guide goes use by use.

Ready for a real number?
Send the size you just entered, what the slab will carry and the address through the form on this page. Houston Concrete Slabs will come back with a quote for that lot.

